Home / Skateboarding / Switch Frontside Tail Slide
Skateboarding intermediate

How to Switch Frontside Tail Slide

Video coming soonRead the steps below, then subscribe so you catch the lesson.Subscribe on YouTube

Hey there, welcome to HowComo.com, your action sports community. Today's trick is a switch variation of our earlier trick, the frontside tail slide. Ready to learn the Switch Frontside Tail Slide? Let's get started!

Step by step

  1. Before learning this trick, make sure you already know How To do ollies and switch ollies, frontside 180s and switch frontside 180s, and regular tail slides very well. Switch, like you know, means that your stance on the skateboard is switched you face the opposite way from usual and your legs are switched as well, so that your usual front leg is now your back leg and vice versa.
  2. This is called the switch frontside tail slide because when you approach the rail/curb in switch position, your front is to it and you'll be doing a switch frontside turn to get the tail on its edge, and then you slide just the tail of your board (not the back wheels/trucks) over the rail/curb. Skate parallel to the curb/rail that you wish to do the tail slide on (some skaters prefer going at a slight angle towards it). Your distance from the rail/curb has to be just right so that you are able to ollie and land your tail alone on the edge. So start at about 2 feet away and tweak that distance if you need to. And make sure the curb/rail is waxed properly, to help you slide.
  3. Approach the rail/curb with your front to it, skating at a moderate-to-good speed with your feet in the switch ollie position. Watch the curb/rail till you are nearly there and pop for a switch ollie as usual.
  4. Start doing a switch frontside 180, but you don't have to go all the way you'll turn your back trucks frontside 90 degrees to land your board sideways, jutting out from the rail/curb, with just the tail balanced on it. The height of your ollie is crucial, so make sure you ollie just high enough.
  5. As you are landing, press down on the tail with your toes, standing with all your weight on the back foot (move your weightless front foot closer to the center of the board to help with your balance). Keep your knees slightly bent for balance, but don't lean forward or back too much or you'll fall and get hurt. Hold as steady over the board as possible and slide down the curb/rail.
  6. Try to let only your lower body do the complete 90-degree turn. Keep as much of your shoulders and upper body as possible in the same direction you were skating before you got on the rail/curb.
  7. As you approach the end of the curb/rail, put pressure on the tail and turn the board backside 90 degrees as you slide off. This is if you want to come back off skating in the same direction as before. If not, go ahead and do another 90-degree frontside turn when you come off.
  8. Bend your knees to absorb the shock as you land, and roll away smoothly.

That's all there is to doing a Switch Frontside Tail Slide in style!

Landed it? Learn the next one.

New skateboarding lessons every week. Subscribe on YouTube All Skateboard tricks

Safety first: wear a helmet and pads, start slow, and practice somewhere safe. Everyone learns at a different pace.

More tricks like this

New lessons weeklySubscribe