How to Switch Frontside Nose Slide
Video coming soonRead the steps below, then subscribe so you catch the lesson.Subscribe on YouTube
Hey there, welcome to HowComo.com, your action sports community. What we are gonna show you today is a switch variation of our earlier trick, the frontside nose slide. Ready to learn the Switch Frontside Nose Slide? Let's go!
Step by step
- Before learning this trick, make sure you already know How To do ollies and switch ollies, backside 180s and switch backside 180s, and nose slides very well. Switch, like you know, means that your stance on the skateboard is switched you face the opposite way from usual and your legs are switched as well, so that your usual front leg is now your back leg and vice versa.
- This is called the switch frontside nose slide because when you approach the rail/curb in switch position, your front is to it (though you'll be doing a switch backside turn to get the nose on its edge!) and then you slide just the nose of your board (not the front wheels/trucks) over the rail/curb. Skate parallel to the curb/rail that you wish to do the nose slide on (some skaters prefer going at a slight angle towards it). Your distance from the rail/curb has to be just right so that you are able to ollie and land your nose alone on the edge. So start at about 2 feet away and tweak that distance if you need to. And make sure the curb/rail is waxed properly, to help you slide.
- Approach the rail/curb with your back to it, skating at a moderate-to-good speed with your feet in the switch ollie position (maybe with your front foot a little closer to the front trucks than usual). Watch the curb/rail till you are nearly there and pop for a switch ollie as usual.
- Start doing a switch backside 180, but you don't have to go all the way you'll turn your front trucks backside 90 degrees to land your board sideways, jutting out from the rail/curb, with just the nose balanced on it. The height of your ollie is crucial, so make sure you ollie just high enough.
- As you are landing, move your front foot quickly to the nose and press down with your toes, standing with all your weight on the front foot (move your weightless back foot closer to the center of the board to help with your balance). Keep your knees slightly bent for balance, but don't lean forward or back too much or you'll fall and get hurt. Hold as steady over the board as possible and slide down the curb/rail.
- Try to let only your lower body do the complete 90-degree turn. Keep as much of your shoulders and upper body as possible in the same direction you were skating before you got on the rail/curb.
- As you approach the end of the curb/rail, put pressure on the nose and turn the board back (frontside) 90 degrees as you slide off (some do a nollie here, but that's optional). This is if you want to come back off skating in the same direction as before. If not, go ahead and do another 90-degree backside turn when you come off.
- Bend your knees to absorb the shock as you land, and roll away smoothly.
That's all there is to doing a Switch Frontside Nose Slide in style!
Landed it? Learn the next one.
New skateboarding lessons every week. Subscribe on YouTube All Skateboard tricks
Safety first: wear a helmet and pads, start slow, and practice somewhere safe. Everyone learns at a different pace.