Home / Skateboarding / Switch Backside Nose Slide
Skateboarding intermediate

How to Switch Backside Nose Slide

Video coming soonRead the steps below, then subscribe so you catch the lesson.Subscribe on YouTube

Today's trick is a switch variation of our earlier trick, the backside nose slide. Ready to learn the Switch Backside Nose Slide? Let's go!

Step by step

  1. Before learning this trick, make sure you already know How To do ollies and switch ollies, frontside 180s and switch frontside 180s, and nose slides very well. Switch, as you know, refers to your switched stance on the skateboard you are facing the opposite way from usual and your legs are switched as well so that your usual front leg is now your back leg and vice versa.
  2. This is called the switch backside nose slide because when you approach the rail/curb in switch position, your back is to it (though you'll be doing a switch frontside turn to get the nose on its edge!) and then you slide just the nose of your board (not the front wheels/trucks) over the rail/curb. Skate parallel to the curb/rail that you wish to do the nose slide on (some skaters prefer going at a slight angle towards it). Your distance from the rail/curb has to be just right so that you are able to ollie and land your nose alone on the edge. So start at about 2 feet away and tweak that distance if you need to. And make sure the curb/rail is waxed properly, to help you slide.
  3. Approach the rail/curb with your back to it, skating at a moderate-to-good speed with your feet in the switch ollie position (maybe with your front foot a little closer to the front trucks than usual). Watch the curb/rail till you are nearly there and pop for a switch ollie as usual.
  4. Start doing a switch frontside 180, but you don't have to go all the way you'll turn your front trucks frontside 90 degrees to land your board sideways, jutting out from the rail/curb, with just the nose balanced on it. The height of your ollie is crucial, so make sure you ollie just high enough.
  5. As you are landing, move your front foot quickly to the nose and press down with your toes, standing with all your weight on the front foot (move your weightless back foot closer to the center of the board to help with your balance). Keep your knees slightly bent for balance, but don't lean forward or back too much or you'll fall and likely hurt yourself quite badly in the process! Hold as steady over the board as possible and slide down the curb/rail.
  6. As far as possible, let only your lower body do the complete 90-degree turn. Keep as much of your shoulders and upper body as possible in the same direction you were skating before you got on the rail/curb.
  7. As you approach the end of the curb/rail, put pressure on the nose and turn the board back (backside) 90 degrees as you slide off (some do a nollie here, but that's optional). This is if you want to come back off skating in the same direction as before. If not, go ahead and do another 90-degree frontside turn when you come off.
  8. Bend your knees to absorb the shock as you land, and roll away smoothly.

Congrats, big gun, you just did a Switch Backside Nose Slide!

Landed it? Learn the next one.

New skateboarding lessons every week. Subscribe on YouTube All Skateboard tricks

Safety first: wear a helmet and pads, start slow, and practice somewhere safe. Everyone learns at a different pace.

More tricks like this

New lessons weeklySubscribe