How to Frontside Tail Slide
Video coming soonRead the steps below, then subscribe so you catch the lesson.Subscribe on YouTube
Hi there, welcome to HowComo.com, your action sports community. Today we are going to show you How To do the Frontside Tail Slide:
Step by step
- Before learning this, make sure you already know How To do ollies and frontside 180s very well. This is called the frontside tail slide because your front is to the curb/rail as you approach it and pop your ollie (and you turn your board frontside to get on it!), then you slide just the tail of your board (not the back wheels/trucks) over the edge of the rail/curb.
- Skate almost parallel to the curb/rail that you wish to do the tail slide on (some skaters prefer going at more of an angle towards it find your own style!). Your distance from it has to be just right so that you are able to ollie and land your tail alone on the rail/curb. So start at about 1 foot away and tweak that distance if you need to. And make sure the rail/curb is waxed properly, to help you slide.
- Approach the curb/rail with your front to it, at a moderate-to-good speed with your feet in the ollie position. Watch the curb/rail till you are nearly there and pop for an ollie as usual. Start doing a frontside 180, but you don't have to go all the way you'll turn your back trucks 90 degrees to land your board sideways, jutting out from the curb/rail, with just the tail balanced on its edge (with both back wheels tight against the curb/rail). The height of your ollie is crucial if you ollie too high, you are likely to get your back trucks as well over, not just the tail! So ollie just high enough.
- Your back foot is anyway on the tail when you pop keep it there when you land and press down with your toes, standing with all your weight on it (move your weightless front foot closer to the centre of the board to help with your balance). Use your back foot to push and guide the board through the slide. Keep your knees slightly bent for balance, but don't lean forward or back too much. Hold as steady over the board as possible and slide down the rail/curb.
- As far as possible, let only your lower body do the complete 90-degree turn. Keep as much of your shoulders and upper body as possible in the same direction you were skating before you began the slide. This will help you when you finish the slide and turn back to the direction you were skating.
- As you approach the end of the rail/curb, put pressure on the tail and turn the board backside 90 degrees as you slide off. Bend your knees to absorb the shock as you land, and roll away smoothly. If you find it easier to get off the rail/curb sliding fakie, then do another frontside 90-degree turn again at the end.
That's all there is to doing the perfect Backside Tail Slide!
Landed it? Learn the next one.
New skateboarding lessons every week. Subscribe on YouTube All Skateboard tricks
Safety first: wear a helmet and pads, start slow, and practice somewhere safe. Everyone learns at a different pace.