How to Backside Tail Slide
Video coming soonRead the steps below, then subscribe so you catch the lesson.Subscribe on YouTube
Today's trick is the Backside Tail Slide:
Step by step
- To learn this, make sure you already know How To do ollies and backside 180s very well (and maybe backside 50-50s and backside 5-0s too, for comfort approaching a ledge/curb/rail backside). This is called the backside tail slide because your back is to the curb/rail as you approach it and pop your ollie (and you turn your board backside to get on it!), then you slide just the tail of your board (not the back wheels/trucks) over the edge of the rail/curb.
- Skate almost parallel to the curb/rail that you wish to do the tail slide on (some skaters prefer going at more of an angle towards it find your own style!). Your distance from it has to be just right so that you are able to ollie and land your tail alone on the rail/curb. So start at about 1 foot away and tweak that distance if you need to. And make sure the rail/curb is waxed properly, to help you slide.
- Approach the curb/rail with your back to it, at a moderate-to-good speed with your feet in the ollie position. Watch the curb/rail till you are nearly there and pop for an ollie as usual. Start doing a backside 180, but you don't have to go all the way you'll turn your back trucks 90 degrees to land your board sideways, jutting out from the curb/rail, with just the tail balanced on its edge (with both back wheels tight against the curb/rail). The height of your ollie is crucial if you ollie too high, you are likely to get your back trucks as well over, not just the tail! So ollie just high enough.
- As you are landing, turn and watch your back heel and the direction you are going. Your back foot is anyway on the tail when you pop keep it there when you land and press down with your toes, standing with all your weight on it (move your weightless front foot closer to the centre of the board to help with your balance). This slide can be scary initially because you have to do it blind for some part of it and you may fear that your board will hit the rail/curb, but keep at it, and once you get the hang of this, you'll love doing this tail slide over long distances! Keep your knees slightly bent for balance, but don't lean forward or back too much. Hold as steady over the board as possible and slide down the rail/curb.
- As far as possible, let only your lower body do the complete 90-degree turn. Keep as much of your shoulders and upper body as possible in the same direction you were skating before you began the slide. This will help you when you finish the slide and turn back to the direction you were skating.
- As you approach the end of the rail/curb, put pressure on the tail and turn the board frontside 90 degrees as you slide off. Bend your knees to absorb the shock as you land, and roll away smoothly. If you find it easier to get off the rail/curb sliding fakie, then do another backside 90-degree turn again at the end.
That's it! Congrats, you just landed a Backside Tail Slide in awesome style!
Landed it? Learn the next one.
New skateboarding lessons every week. Subscribe on YouTube All Skateboard tricks
Safety first: wear a helmet and pads, start slow, and practice somewhere safe. Everyone learns at a different pace.
