How to 360 v2
Video coming soonRead the steps below, then subscribe so you catch the lesson.Subscribe on YouTube
Before you learn the 360, you'll need to know How To perform a bunny hop. Once you learn that you are ready to get started.
Step by step
- Find a flat area with plenty of space to ride around. Ride into your 360 at a moderate pace with your knees and elbows bent. You'll need a decent amount of speed to get your bike through a full spin, but don't go too fast while you're learning. That'll make the trick harder to control.
- Lean into a turn in the direction of the spin. Choose whichever direction is most comfortable for you. As your bike begins to turn, compress your body, ready to explode into a bunny-hop.
- Pull up hard on the handlebars as your bike enters its turn. Spring up with the entire force of your body, and use this movement and the momentum it generates to pull the bike as far into the air as you can. You'll need to hop higher than you would for a 180 because you need to have time in the air to complete the full 360.
- Turn your head and body to swing your bike through the turn. Continue to pull up on your handlebars to get the bike really high in the air. Your body should be leading the movement of your bike through the turn. Now you've passed the 180, don't get too excited, you are only half-way there. The 180 should be complete while you are still ascending. Now, lean forward slightly as you reach about 270 degrees to level the bike out for the landing. Tuck the bike up at this point.
- Push your weight back over the pedals to balance the trick as you reach 360 degrees, and force the bike back onto the ground by pushing down onto the pedals and handlebar.
Bend your knees to absorb the landing shock, then ride away from the landing zone.
Landed it? Learn the next one.
New bmx lessons every week. Subscribe on YouTube All BMX tricks
Safety first: wear a helmet and pads, start slow, and practice somewhere safe. Everyone learns at a different pace.

